Fast guide to Smarty's software levels.
All horsepower settings, except #0, have a modified "Torque Management" (TQM). The throttle response is greatly improved but is set to a safe limit that a stock transmission and driveline should handle without abusive driving.
Tested on stock trucks on a Mustang Dyno. Stock means just that. Stock! Even the air filters were stock...
Power on Demand
All power levels selectable in just one second during the driving! It's easy: just type the preferred power level directly on Smarty keyboard. That's all! For security reason, the truck waits that the throttle is released before applying the new power level.
No trace is left in the ECM!
SmartyCR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does not leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does not need to have fuses pulled.
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds.
DTC Code reader
You can read and erase codes. Codes are displayed also in plain English. (Smarty does erase ABS codes too but does not display them)
ECM Update Speed
Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor. Smarty developed its own boot loader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.
Updates
Updates are available on the internet for free. Smarty works hard to change it's tuning to what the customer is looking for.
Back to Article List