Fuel Supply Banjo Fittings
The FASS systems do not use any banjo bolt fittings. If you use a pressure sending unit, like the Edge w/Attitude or the BD low PSI warning light, then you need a banjo fitting with a barb end for the hose part number F-12001/7, or move the sending unit to a different location. The F-12001/7 fitting is used with 10 mm or 3/8 inch hose which is the same size used in the FASS products listed below.
The banjo bolt with the PSI port in it already is part number 4918413.
The sealing rings for the banjo bolt and fittings are part number 090222-0060 (requires quantity of two).
Back to Article List
