Organic/Ceramic Dual Disc 650h

Description

1988-1993 Dodge Cummins 550-750 HP Street Dual Disk Clutch & Flywheel Kit Getrag Transmission

South Bend Clutch heard the call for the organic dual disc clutch but wanted to offer the best in both durability and drive-ability. How did they achieve that? In their 50 years of experience they knew that running an all organic dual disc would have it’s problems. The intermediate (center) plate is approximately ½” thick whereas the pressure plate and flywheel castings are three times that. Running two friction surfaces on one thin casting will increase the temperature to that casting. Organic burn point is approximately 550 degrees whereas ceramic can reach 1100 degrees. The immediate engagement points when the clutch is released for takeoff are the outside points of a dual disc clutch, pressure plate and flywheel. Being that there is only one friction surface running to these two points, and the fact that the pressure plate and flywheel castings are much thicker than the center plate, the temperatures cannot reach that of the center plate. This is why organic will work to the pressure plate and flywheel and not to the center plate.

The street dual disk is intended for street use only. This is not a competition, drag race or sled pulling clutch. This is for the person who is running serious horse power in the 550 – 650 range and wants to pull 30,000 pounds if they want.

If you are looking for something in between this clutch and an all-out competition clutch, give us a call.  A high power daily driven truck that competes once in a great while on the weekend type clutch can be built. If you pull consistently you need a competition setup, period.

GETRAG SDD 3250- 5- G 650 Hp 1300 Trq. 30k towing

See the wide variety of Dodge Cummins Diesel Performance parts offered by Huckstorf Diesel both online here, and in person at Wisconsin’s premier Diesel Performance sales and installation center located just outside of Milwaukee Wisconsin in Franklin WI.